EAW Speaker System CB152x User Manual

Technical Specifications CB152x  
CINEMA SERIES  
APPLICATION  
• For small theaters  
• Full Range passive 2-way screen channel loudspeaker  
• Requires only a single amplifier channel and no external  
electronic crosssover  
PRODUCT INFORMATION  
The CB152x 2-way screen loudspeaker system fills small theaters  
with all the high-impact, full-range on today's digitally encoded  
soundtracks. Its internal passive LF/HF crossover/filter network  
allowsittobepoweredbyasingleamplifierchannelwithnoexternal  
electronic crossover.  
The two component system includes a BV154C vented 15-in low  
frequency unit and an HK152 high frequency system – a medium  
format 90° x 90° HF horn loading a large diaphragm 1.4-in exit  
compression driver.  
The HK152's medium format cinema HF horn ensures even distribu-  
tion of HF information over the entire audience area.  
The BV154C’s optimally vented enclosure uses the enclosure's  
resonance to increase LF response while limiting driver excursion.  
This method produces less distortion and minimizes driver strain  
while extending LF response to the lowest octaves.  
The BV154C’s asymmetrical enclosure design smooths response in  
the LF component's upper register and minimizes the potential for  
standing waves inside the enclosure. Left and right side enclosures  
can be placed flush to a back wall while still focusing their output  
to the audience area. The enclosure can be inverted to provide a  
right or left-handed angle.  
CB152x  
TOP  
The low and high frequency sections are integrated via an internal  
passive crossover/filter network. EAW's complex, computer-de-  
signed passive filter networks are tightly aligned to the loudspeak-  
ers they control and go beyond merely dividing the signal, perform-  
ing critical equalization functions.  
The LF enclosure has 2 mounting points on both top and bottom to  
allow optimum front/rear positioning of the mid/high component  
for either right or left channel. The bracket allows the HF horn to be  
aimed independently of the LF section in both the horizontal and  
vertical planes and can be locked once it is positioned.  
FRONT  
LEFT  
RIGHT  
TheLFsectionincludesa2-terminal barrierstripwhichaccomodates  
bare wire, tinned leads or spade lugs. A "jumper cable" is supplied  
to continue the signal chain to the HF section.  
All components feature a textured black finish to eliminate the  
reflection of light through perforated cinema screens.  
BOTTOM  
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.  
exp 3/2/97 mka  
EAW products are continually improved. All specifications are therefore subject to change without notice. • CB152x PUB#888117 Rev(A)/6/1/99 • Printed In USA  
 

Exmark Lawn Mower TTS16KA363 User Manual
Fisher Paykel Dishwasher DD605 User Manual
Fisher Price Digital Camera J8209 User Manual
FOCUS Enhancements Microcassette Recorder DVCPRO25 User Manual
Friedrich Air Conditioner EL36 User Manual
Fujitsu Photo Scanner FI 6130Z User Manual
GE Air Conditioner AZ85E12EAC User Manual
GE Telephone 15929620 User Manual
Gianni Industries Switch KS 750 User Manual
Global Machinery Company Saw MPS184M User Manual