Clarion Cassette Player AX430 User Manual

Thank you for purchasing the Clarion product.  
Owner’s manual  
* Please read this owner’s manual in its entirety before operating this equipment.  
* After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
* Check the contents of the enclosed warranty card and keep it carefully with this manual.  
10. 規格  
FM 調諧器  
整機  
頻率范圍⋯⋯87.0 MHz 到 108 MHz  
實際靈敏度⋯⋯11 dBf  
電源電壓⋯⋯14.4 V DC  
(10.8 V 到 15.6 V 均可)  
50 dB 無噪聲靈敏度⋯⋯17 dBf  
相隔信道專一度⋯⋯75 dB  
耗電⋯⋯小于 15 A  
揚聲器阻抗⋯⋯4(4到 8)  
重量⋯⋯1.5 kg  
立體聲分離度 (1 kHz)⋯⋯35 dB  
頻率響應 (±3 dB)⋯⋯30 Hz 到 15 kHz  
Contents  
尺寸  
1. FEATURES .................................................................................................................................2  
2. CONTROLS ................................................................................................................................3  
3. NOMENCLATURE......................................................................................................................4  
Names of Buttons .......................................................................................................................4  
4. PRECAUTIONS ..........................................................................................................................4  
5. DCP .............................................................................................................................................5  
6. REMOTE CONTROL..................................................................................................................6  
Inserting the Batteries.................................................................................................................6  
Functions of Remote Control Unit Buttons ................................................................................7  
7. OPERATIONS ............................................................................................................................8  
Basic Operations ........................................................................................................................8  
Radio Operations ........................................................................................................................9  
Tape Operations ....................................................................................................................... 11  
CD Changer Operations ...........................................................................................................12  
8. IN CASE OF DIFFICULTY .......................................................................................................13  
9. ERROR DISPLAYS ..................................................................................................................13  
10. SPECIFICATIONS ....................................................................................................................14  
⋯⋯寬 178 mm x 高 50 mm x 深 155 mm  
AM 調諧器  
頻率范圍⋯⋯531 kHz 到 1602 kHz  
實際靈敏度⋯⋯25μV  
AX430  
(178 mm)  
(50 mm)  
磁帶  
AM/FM CASSETTE PLAYER  
WITH CD CHANGER CONTROL  
抖晃率 (WRMS)⋯⋯0.08%  
信道分離 (1 kHz)⋯⋯45 dB  
信噪比⋯⋯70 μs  
AM/FM 盒式放音機  
帶有 CD 換片機控製  
(二氧化鉻化鐵屬帶: 58 dB  
頻率響應 (±3 dB)  
(188 mm)  
(58 mm)  
120μs普通⋯30 Hz 到 18 kHz  
70μs二氧化鉻化鐵屬帶)  
⋯⋯30 Hz 到 20 kHz  
注意︰  
規格符合 EIA 標準。  
于產品更新的需要格和設計若有變更不  
另行通知。  
音頻  
最大功率輸出⋯⋯200 W50 W x 4 聲道)  
連續平均功率輸出⋯⋯17 W x 4420 Hz  
到 20 kHz, 1% THD  
低音控製 (30 Hz)⋯⋯±13 dB  
高音控製 (10 kHz)⋯⋯±10 dB  
1. FEATURES  
I DIN Chassis with Detachable Control Panel  
I Z-Enhancer with 3 Mode Sound Selector  
線路輸出⋯⋯1.8  
V 在CD A/C 1kHz 10 k狀態)  
I
FM Reception System  
I AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory  
I Full Logic Tape Transport with True Function  
I Auto Reverse with Azimuth Adjust  
I Auto Metal Tape EQ  
I Multi-Color LC Display  
I 2-Channel RCA Line Level Output with Fader Control  
I 200 W (50 W × 4) Maximum Power Output  
I Infrared Remote Control  
Clarion Co., Ltd.  
Be sure to unfold and read the next page.  
請務必展開並閱讀下頁。  
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.  
PE-1712K-E  
280-7890-00  
2002/11 (C/A)  
AX430  
2
 
2. CONTROLS/控制鍵  
3. NOMENCLATURE  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
注意︰閱讀各章時務請展開此頁並參照前視圖。  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLSon page 3 (unfold).  
Names of Buttons  
SOURCE UNIT / 主機  
[RELEASE] button  
[ROTARY] knob  
[A-M] button  
Cassette Insertion Slot  
盒帶插入槽  
[
]
[
]
[
]
ISR  
RELEASE  
ROTARY  
[
]
A-M  
[
]
Q
[
]
FNC  
Loudness button  
[FNC] button  
Power button  
[Q] button  
[ISR] button  
[DISP] button  
[RDM] button  
[RPT] button  
Blank Skip button  
[SCN] button  
[
]
[
[
]
DISP  
BND  
[
[
]
s
]
RDM  
Preset Scan/Auto Store button  
[DIRECT] buttons (1 to 6)  
[Z-EHCR] button  
[BND] button  
][  
]
[
]
[
]
DIRECT  
a d  
Z-EHCR  
[
]
RPT  
[
]
SCN  
Program button  
Magazine button  
DISPLAY / 顯示屏  
[
], [  
] buttons  
[ s ] button  
Mute button  
4. PRECAUTIONS  
1. Tape slack can lead to operating difficulties.  
Remove tape slack before inserting a cassette,  
particularly when using C-90 or prerecorded  
cassettes.  
5. Always remove the cassette from the mecha-  
nism when not in use. Exposure to direct sun-  
light, extreme temperatures or high humidity  
may damage cassettes.  
2. Use C-30 to C-90 cassettes. Avoid use of C-  
120 or longer cassettes (The very thin tape  
may stretch or break).  
6. The cassette tape will automatically eject from  
the mechanism if it is damaged. Always en-  
sure that cassette tapes are in good condition  
prior to use.  
3. Clean the head periodically with a good com-  
mercial head cleaner. Avoid touching the head  
with magnetic or hard objects.  
INFORMATION FOR USERS:.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE MANU-  
FACTURER WILL VOID THE WARRANTY AND  
WILL VIOLATE FCC APPROVAL.  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
4. Do not oil the cassette mechanism.  
3
AX430  
4
AX430  
 
5. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the included DCP case to prevent scratches.  
Storing the DCP in the DCP Case  
Hold the DCP, in the orientation as shown in the  
figure below, and put it into the supplied DCP  
case. (Ensure the DCP is in the correct orienta-  
tion.)  
We recommend taking the control panel with you  
when leaving the car.  
DCP  
Removing the DCP  
1. Turn off the power.  
2. Press the [RELEASE] button.  
DCP case  
[RELEASE] button  
CAUTION  
• The DCP can easily be damaged by shocks.  
After removing it, place it in its case and be  
careful not to drop it or subject it to strong  
shocks.  
DCP  
* The DCP is unlocked.  
3. Remove the DCP.  
• When the [RELEASE] button is pressed and  
the DCP is unlocked, the car’s vibrations may  
cause it to fall. To prevent damage to the DCP,  
always store it in its case after detaching it.  
CAUTION  
• The connector connecting the source unit  
and the DCP is an extremely important part.  
Be careful not to damage it by pressing on  
it with fingernails, pens, screwdrivers, etc.  
Do not insert the DCP from the left side. Do-  
ing so may damage it.  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
DCP Rear Panel  
Source Unit Front  
2. Insert the left side of the DCP into the main  
unit.  
DCP  
2.  
Source unit  
connector  
connector  
Note:  
If the DCP is dirty, wipe off with a soft, dry cloth.  
DCP  
1.  
AX430  
5
 
6. REMOTE CONTROL  
Receiver for remote control unit  
Operating range: 30˚ in all directions  
Remote control unit  
Signal transmitter  
[
]
]
[
[
]
DUAL ZONE  
FUNC  
]
[
],[  
[
[
],[  
]
]
BAND  
[
]
ISR  
[
]
[
[
]
DISP  
MUTE  
]
[
]
RDM  
SCN  
[
]
RPT  
Inserting the Batteries  
1. Turn the remote control unit over, then slide  
the rear cover in the direction of the arrow.  
AA (UM-3/1.5V)  
Batteries  
2. Insert theAA (UM-3/1.5V) batteries that came  
with the remote control unit facing in the  
directions shown in the figure, then close the  
rear cover.  
Notes:  
Using batteries improperly can cause them to  
explode. Take note of the following points:  
Rear cover  
When replacing batteries, replace both batteries  
with new ones.  
Do not short-circuit, disassemble or heat batteries.  
Do not dispose of batteries into fire or flames.  
Dispose of spent batteries properly.  
Rear side  
6
AX430  
 
Functions of Remote Control Unit Buttons  
Mode  
Radio  
Tape  
CD changer  
Button  
[FUNC]  
Turns power on and off. When pressed and held for 1 second: Turns power off.  
Switches between radio, Tape and CD changer.  
[BAND]  
Switches reception band.  
Switches the side of the  
tape.  
Moves the next disc in  
increasing order.  
[w], [z]  
[a], [d]  
Increases and decreases volume (in all modes).  
Moves preset channels up Fast-forward and rewinds  
Moves tracks up and  
down.  
and down.  
tape.  
APC fast-forward and  
rewind.  
When pressed and held for  
1 second:  
Fast-forward/  
fast-backward.  
[s]  
[MUTE]  
[ISR]  
Turns mute on and off.  
Turns mute on and off.  
Switches between  
Switches between  
playback and pause.  
playback and pause.  
Switches between  
playback and pause.  
Switches between  
playback and pause.  
Recalls ISR radio station in memory.  
Press and hold for more than 2 seconds: Stores current station into ISR memory  
(radio mode only).  
[DISP]  
[SCN]  
Switches among main display and clock display.  
Preset scan.  
Fast-forward scan.  
Scan play.  
When pressed and held for  
1 second: Disc scan play.  
When pressed and held for  
2 seconds: Auto store.  
[RPT]  
No function.  
No function.  
Repeat play.  
Repeat play.  
When pressed and held for When pressed and held for  
1 second:  
Blank tape skip function  
turns on and off.  
1 second: Disc repeat  
play.  
[RDM]  
No function.  
Random play.  
When pressed and held for  
1 second: Disc random  
play.  
* Some of the corresponding buttons on the source unit and remote control unit have different functions.  
* [DUAL ZONE] button is not available.  
AX430  
7
 
7. OPERATION  
Note:  
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLSon page 3 (unfold).  
Basic Operation  
Adjusting the Treble  
1) Press [A-M] button and select TREB.  
CAUTION  
When this unit is turned on, starting and stop-  
ping the engine of a car with its volume raised  
to the maximum level may harm your hearing.  
2) Turning the [ROTARY] knob clockwise empha-  
sizes the treble; turning it counterclockwise at-  
tenuates the treble.  
Be careful about adjusting the volume.  
* The factory default setting is 0. (Adjustment  
range: –6 to +6)  
1) Press the [FNC] button.  
3) When the adjustment is complete, press [A-M]  
button several times until the function mode is  
reached.  
* To turn the power off, press the [FNC] button  
for at least 1 second.  
2) Press the [FNC] button to select the opera-  
tion mode. The mode switches as follows each  
time the [FNC] button is pressed:  
Adjusting the Balance  
1) Press [A-M] button and select BAL.  
Radio Tape CD changer Radio  
2) Turning the [ROTARY] knob clockwise empha-  
sizes the sound from the right speaker; turn-  
ing it counterclockwise emphasizes the sound  
from the left speaker.  
* If a component is not connected, that opera-  
tion mode cannot be selected.  
* CASSappears when no tape is loaded in  
the source unit, and DISCappears when  
no disc is loaded in the CD changer.  
* The factory default setting is 0. (Adjustment  
range: L9 to R9)  
3) Turning the [ROTARY] knob clockwise in-  
creases the volume; turning it counterclock-  
wise decreases the volume.  
3) When the adjustment is complete, press [A-M]  
button several times until the function mode is  
reached.  
* The volume level is from 0 (minimum) to 33  
(maximum).  
Adjusting the Fader  
1) Press [A-M] button and select FAD.  
2) Turning the [ROTARY] knob clockwise empha-  
sizes the sound from the front speakers; turn-  
ing it counterclockwise emphasizes the sound  
from the rear speakers.  
Audio Mode Adjustments  
Press the [A-M] button to select the adjustment  
mode. The mode switches as follows each time  
the [A-M] button is pressed:  
BASS TREB BAL FAD Previous mode  
* The factory default setting is 0. (Adjustment  
range: F9 to R9)  
Adjusting the Bass  
3) When the adjustment is complete, press [A-M]  
button several times until the function mode is  
reached.  
1) Press [A-M] button and select BASS.  
2) Turning the [ROTARY] knob clockwise empha-  
sizes the bass; turning it counterclockwise at-  
tenuates the bass.  
Setting the Z-enhancer  
This unit comes with three types of sound tone  
effects stored in memory. Select the one you pre-  
fer.  
* The factory default setting is 0. (Adjustment  
range: –6 to +6)  
3) When the adjustment is complete, press[A-M]  
button several times until the function mode is  
reached.  
* The factory default setting is Z-EHCR OFF.  
Each time you press [Z-EHCR] button, the tone  
effect changes in the following order.  
Z-ENHANCER 1Z-ENHANCER 2➜  
Z-ENHANCER 3Z-EHCR OFF➜  
Z-ENHANCER 1...  
8
AX430  
 
Radio Operation  
Basic Operation  
Z-ENHANCER 1: bass emphasized  
Z-ENHANCER 2: treble emphasized  
Z-ENHANCER 3: bass and treble emphasized  
Z-EHCR OFF: no sound effect  
FM Reception  
For enhanced FM performance the  
tuner includes signal actuated stereo control and  
Multipath noise reduction circuits.  
Listening to the Radio  
Loudness Function  
1) Press the [FNC] button and select the radio  
Press the [A-M] button for at least 1 second to  
mode. The radio turns on.  
turn the loudness function on and off.  
2) To tune in a preset station, first press the [BND]  
button and select FM1, FM2, FM3 or AM.  
Switching the Display  
The band changes as follows each time the  
[BND] button is pressed:  
Press the [DISP] button to enter the clock dis-  
play mode.  
FM1 FM2 FM3 AM FM1  
Operation mode display Clock display Op-  
eration mode display  
3) Use the [DIRECT] buttons to select the de-  
sired station.  
Setting the Clock  
1) Press the [DISP] button to enter the clock dis-  
Mute  
Use this function to turn off the sound immedi-  
ately.  
play mode.  
2) Press the [DISP] button for 1 second or longer.  
Press the [s] button. The sound turns off and  
MUTEappears on the display. Press the [s]  
button again to cancel the mute mode.  
This enables clock editing.  
* The editable fields will be indicated by flash.  
3) To move between the hour and minute fields,  
use the [  
(minute) buttons.  
] Left (hour) and [  
] Right  
Seek Tuning  
1) Press the [BND] button and select the desired  
4) To confirm the clock setting, press the [DISP]  
button.  
band.  
2) Press the [  
automatically stops when a station is found.  
] or [  
] button. Seek tuning  
Notes:  
If you select another operation mode before com-  
pleting the above procedure, the clock setting  
operation will be canceled.  
Manual Tuning  
1) Press the [BND] button and select the desired  
band.  
Removing the battery for a check or repair causes  
the clock to be reset. Set the clock again in such  
a case.  
2) Press the [BND] button again for more than 1  
second. MANUlights in the display and the  
manual tuning mode is set.  
3) Use the [  
] and [  
] buttons to tune in the  
desired frequency.  
Presetting Stations  
A total of 24 stations can be preset, 6 each for  
the FM1, FM2, FM3 and AM bands.  
Note:  
When a station is preset, the station previously  
stored in the memory at that position is cleared.  
AX430  
9
 
Radio Operation  
Presetting stations manually  
Area Change  
Use this to listen to the radio in the United States.  
1) Press the [BND] button to select the band at  
which to store the station.  
This car stereo is initially set to tune in frequency  
intervals of 9 kHz for AM and 50 kHz for FM, the  
standard calibrations outside the U.S. When  
using the unit in the U.S., use the following pro-  
cedure to switch the frequency steps and fre-  
quency range:  
2) Use the [  
] and [  
] buttons to tune in the  
station to be preset.  
3) Press the [DIRECT] button at which you want  
to store that station for at least 2 seconds.  
Auto store function  
Switching the area change U.S standard  
(New Setting)  
1) Press the [BND] button to select the band at  
which to store the stations.  
1) Set the tuner mode.  
2) Press the [SCN] button for at least 2 seconds.  
Stations with good reception are automatically  
stored at [DIRECT] buttons 1 to 6.  
2) While pressing the [BND] button, press the  
[
] button.  
3) Release the buttons.  
* If there are fewer than 6 stations with good  
reception, the stations previously stored at  
the remaining buttons are not cleared.  
This procedure changes the factory setting to  
10 kHz steps for AM and 200 kHz steps for  
FM.  
Preset Scanning (Preset Station Scan)  
Switching the area change outside U.S  
(Inital Setting)  
When the [SCN] button is pressed, the preset  
memory numbers flash and the stations are tuned  
in for 7 seconds each in the order in which they  
were stored. Press the [SCN] button again to can-  
cel the preset scanning mode.  
1) Set the tuner mode.  
2) While pressing the [BND] button, press the  
[
] button .  
3) Release the buttons.  
Your car stereo will once again be calibrated  
to receive outside U.S. transmissions.  
Instant Station Recall (ISR)  
This function allows you to recall a specific radio  
station from any mode. Use it to find stations  
quickly when you want to hear specific informa-  
tion (such as traffic announcements) while driv-  
ing. The ISR station is set to 87.5 MHz upon ship-  
ment from the factory.  
The chart below lists the frequency specifi-  
cations for the U.S. and other countries.  
Inital Setting New Setting  
(outside U.S.) (U.S. standard)  
ISR memory  
1) Press the [FNC] button to select the radio  
mode.  
Frequency  
spacing  
9 kHz  
10 kHz  
2) Tune in the station to be set as the ISR sta-  
tion.  
AM  
FM  
Frequency  
range  
531 to  
1602 kHz  
530 to  
1710 kHz  
3) Press the [ISR] button for more than 2 seconds  
to store that station in the memory as the ISR  
station.  
Frequency  
spacing  
50 kHz  
200 kHz  
Recalling a station with ISR  
Frequency  
range  
87.0 to  
108 MHz  
87.9 to  
107.9 MHz  
Press the [ISR] button from any mode. ISR”  
appears on the display and the set station is  
tuned in. To cancel, press the [ISR] button again.  
10  
AX430  
 
Tape Operation  
Loading Tapes  
Repeat Function (Repeat Play)  
Insert the cassette tape into the Cassette inser-  
tion slot with the side on which the tape is ex-  
posed facing the right. Playback starts automati-  
cally.  
When the [RPT] button is pressed, RPTap-  
pears on the display and the current track is  
played repeatedly. Press the [RPT] button again  
to cancel the repeat mode.  
* The metal tape setting is set automatically when  
a metal or chrome tape is loaded.  
Blank Skip Function  
Use this function to automatically skip to the be-  
ginning of the next recorded section when there  
is a blank section of 12 seconds or more on the  
tape.  
* When the end of the cassette tape is reached,  
the auto reverse mechanism is activated and  
the other side of the tape begins playing auto-  
matically.  
When the [RPT] button is pressed for 1 second  
or longer, the blank skip mode is set and BLS”  
appears on the display. Press the [RPT] button  
again for 1 second or longer to cancel the blank  
skip mode.  
Listening to a tape which is already loaded  
Press the [FNC] button to select the tape mode.  
Playback begins automatically.  
Stopping Playback Temporarily  
Notes:  
Press the [s] button. Press the button again  
The APC, scan, repeat and blank skip functions will  
not work with the following types of tapes:  
to resume playback.  
Tapes on which the recording level is low  
Tapes on which there is less than 4 seconds of  
blank space between selections  
Tapes on which there are long pauses in the  
middle of selections  
Tapes on which there is much noise between  
selections  
Ejecting Cassette Tapes  
Press the [Q] button. The cassette tape is  
ejected.  
* The radio mode is set automatically 4 seconds  
after the [Q] button is pressed.  
Fast-Forwarding and Rewinding  
Use the [  
] and [  
] buttons.  
: Press this to fast-forward the tape.  
: Press this to rewind the tape.  
APC (Auto Program Control)  
Press the [  
] and [  
] button twice.  
: Press this twice to move ahead to the  
beginning of the next selection.  
: Press this twice to move back to the be-  
ginning of the current selection.  
Switching to the Other Side of the  
Tape  
Press the [BND] button. Playback is switched to  
the other side of the cassette tape.  
FF Scan Function (Intro Music  
Scan)  
When the [SCN] button is pressed, SCNap-  
pears on the display, and the first 10 seconds of  
all the tracks on the cassette tape are played.  
Press the [SCN] button again to stop scanning.  
AX430  
11  
 
CD Changer Operation  
When a separately sold CD changer is con-  
nected, it can be controlled from the source unit.  
Disc scan play  
Press and hold the [SCN] button for 1 second or  
longer, then the display will show “  
SCN, and plays the first 10 seconds of the first  
tracks of all the CDs in the CD changer.  
and  
Notes:  
Some CDs recorded in CD-R mode may not be  
usable.  
Even when recorded in CD-RW mode, some CDs  
may not be usable.  
Press the [SCN] button again to disengage the  
unit from disc play.  
* A scan play will start from the first tracks of next  
CDs following the one currently playing.  
Listening to the Disc  
Press the [FNC] button and select the CD  
changer mode, then the CD starts playing.  
Repeat Play  
Press the [RPT] button, then the display shows  
RPT, then the track currently playing will be  
played repeatedly. Press the [RPT] button again  
to disengage the unit from repeat play.  
Stopping (pausing) Playback  
Press the [s] button.  
Press the [s] button again to resume playback.  
Disc repeat play  
Selection of CDs  
Press and hold the [RPT] button for 1 second or  
longer, then the display shows both the “  
and RPT, then the disc currently being played  
Press the [DIRECT] button to select 1 to 6, then  
select the CD you wish to play.  
will be played repeatedly.  
Selecting Tracks (songs)  
Press the [RPT] button again to disengage the  
unit from disc repeat play.  
Press the [  
] and [  
] buttons.  
: Playback will start from the next track.  
: Playback will start from the beginning of  
the track currently playing. When this  
button is pressed again, the CD will play  
from the previous track.  
Random Play  
Press the [RDM] button, then the display will  
show RDM, then the entire tracks on the disc  
will be played at random.  
Press the [RDM] button again to disengage the  
unit from disc random play.  
Fast-Forward and Fast-Backward  
Press and hold the [  
] and [  
] buttons.  
Disc random playback  
: To fast-forward  
Press and hold the [RDM] button for 1 second or  
longer, then the display will show both the  
: To fast-backward  
* Pressing the [ ] / [  
] button for 1 second or  
and RDM, then the entire tracks of  
longer will move forward or backward 5 times  
faster than normal play, and pressing it for 3  
seconds or longer will do the operation 30 times  
faster.  
all the discs in the CD changer will be played at  
random.  
Press the [RDM] button again to disengage the  
unit from disc play.  
Scan Play (Intro Music Scan)  
Switching Magazine  
This function can be used only when the con-  
nected CD changer can store a multiple number  
of magazines.  
Press the [SCN] button, then the display shows  
SCN, then the CD will play the first 10 sec-  
onds of all the tracks of all CDs. Press the [SCN]  
button again to disengage the unit from scan play.  
Every time the [BND] button is pressed, the next  
magazine will be selected.  
* A scan play will start from the track following  
the one currently playing.  
12  
AX430  
 
8. IN CASE OF DIFFICULTY  
Problem  
Cause  
Measure  
Power does not turn on.  
(or no sound is produced.)  
Fuse is blown.  
Replace with a fuse of the same  
amperage as the old fuse.  
Connections are improper. Read the attached Installation/Wire  
Connection Guideonce again and  
wire properly.  
Sound quality is poor.  
Playback head is dirty.  
Use a cleaning tape, etc. to clean the  
head.  
No sound while unit can  
be operated.  
Power ANT lead is shorted  
to the ground.  
Turn the unit off, first.  
Remove all connecting wires from the  
power ANT lead, and turn the unit on,  
then re-connect a wire one by one to  
the power ANT lead.  
When sound is muted again, check  
the unit with a wire connected last.  
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 1  
Cause  
Measure  
Tape cannot be played due to defective Eject the tape then replace it with a new  
tape such as cut tape.  
one.  
ERROR 2  
ERROR 4  
Tape is caught and cannot be played.  
Tape mode cannot be detected.  
Remove the caught or wound tape.  
This is a failure of tape mechanism and  
consult your store of purchase.  
ERROR 8  
ERROR 2  
Tape is caught and cannot be ejected. Eliminate the reason for which the tape  
is caught.  
A CD inside the CD changer is not This is a failure of CD changers mecha-  
loaded.  
nism and consult your store of pur-  
chase.  
ERROR 3  
ERROR 6  
A CD inside the CD changer cannot be Replace with a non-scratched, non-  
played due to scratches, etc. warped disc.  
A CD inside the CD changer cannot be Eject the disc then reload it properly.  
played because it is loaded upside-  
down.  
If a display other than one of the displays above appears, press the reset button. If the problem per-  
sists, turn the power off and contact your store of purchase.  
AX430  
13  
 
10. SPECIFICATIONS  
FM Tuner  
General  
Frequency Range……87.0 MHz to 108 MHz  
Usable Sensitivity……11 dBf  
50 dB Quieting Sensitivity……17 dBf  
Alternate Channel Selectivity……75 dB  
Stereo Separation (1 kHz)……35 dB  
Frequency Response ( 3 dB)  
……30 Hz to 15 kHz  
Power Supply Voltage  
14.4 V DC (10.8 V to 15.6 V allowable)  
Current Consumption…… Less than 15 A  
Speaker Impedance  
4 (4 to 8 allowable)  
Weight……3.3 lb. (1.5 kg)  
Dimensions  
…… 7" (178 mm) Width × 2" (50 mm) Height  
× 6-3/32" (155 mm) Depth  
AM Tuner  
Frequency Range……531 kHz to 1602 kHz  
7"  
2"  
(178 mm)  
(50 mm)  
Usable Sensitivity……25 µV  
Tape  
Wow & Flutter (WRMS)……0.08%  
Channel Separation (1 kHz)……45 dB  
Signal to Noise Ratio  
7-3/8"  
(188 mm)  
2-1/4"  
(58 mm)  
……70 µs (CrO2, FeCr, Metal): 58 dB  
Frequency Response ( 3 dB)  
120 µs (normal)……30 Hz to 18 kHz  
70 µs (CrO2, FeCr, Metal)……30 Hz to 20 kHz  
Notes:  
Specifications comply with EIA Standards.  
Specifications and design are subject to change  
without notice for further improvement.  
Audio  
Maximum Power Output……200 W (50 W × 4ch)  
Continuous Average Power Output  
…… 17 W × 4, into 4 , 20 Hz to 20 kHz, 1%  
THD  
Bass Control Action (30 Hz)…… 13 dB  
Treble Control Action (10 kHz)…… 10 dB  
Line Output……1.8 V (with CD A/C 1kHz 10 k)  
14  
AX430  
 

CNET All in One Printer Printer Fax Scanner Copier User Manual
Compaq Server DL380 G2 User Manual
Continental Electric Coffee Grinder CE23591 User Manual
Cornelius Beverage Dispenser Ice Drink Dispenser with Flavor Shot User Manual
Creda Refrigerator 86410 User Manual
Danby Refrigerator DAR1102BSL User Manual
Durst Printer Rho 600 Pictor User Manual
El Paso Chile Company Stereo Amplifier OM163 User Manual
Estate Refrigerator TT18AK User Manual
Euro Pro Fryer F1063 User Manual